Category: Sydney

Blocked drains are perhaps one of the biggest problems most plumbers encounter. However, there are some DIY solutions which can help temporarily, but if a bigger blockage is to be addressed, a professional plumber would need the services of an experienced drain contractor.

Before you call in a plumbing company, first understand what the causes of blocked drains in Sydney are and how to deal with them. One of the major reasons why water is blocked in your drains is because of accumulation of fecal matter, dead skin cells and other foreign matter in them. This usually happens during periods when you use the toilet or flush your toilet. This problem may also be associated with poor sanitation as people flush things away that they do not wish to throw into the toilet.

Blocked pipes are sometimes caused by faulty connections, and this problem is best dealt with by a professional plumber. If you find that the pipes are clogged in the right place, then there is nothing much you can do, as you cannot clean the blockage completely. But if the blockage is in the drainage system and there is no way to clear it, then you can try to remedy the problem by installing a float switch or using water suction to unblock the drains.

The plumbing companies are trained in dealing with blocked drains in Sydney situations and are skilled enough to identify the type of problem. They are well versed in the installation process and are aware of the various things that can cause a problem, thus, they can make suggestions on how to make the drains run smoothly. If there is still no sign of improvement, then the experts will be the ones who will have to take matters into their hands and carry out the necessary repairs.

The first step in dealing with blocked drains in Sydney is to carry out a drain cleaning which involves emptying the entire drainage pipe of all the accumulated debris and dirt and allowing it to drain back into the main sewer line. If you have an older model of the toilet, you may have to drain the entire system of water before you can get rid of the blockage. If the main line is blocked, then you can use a drain snake or a plunger to open the pipe and allow the water to drain back into the sewer.

The next step is to unclog the blocked drains in Sydney. There are many DIY solutions such as plunger-mounted tools, but if the clogging problem is very severe and persistent, it might require the services of a professional plumber who has years of experience dealing with drains. In such cases, the pipes can be treated by sanding them down and then re-tubbing them with cement to seal the clog.

It is important to drain the system on a regular basis. For example, if you live in the suburbs and you have a home with a kitchen sink, you must drain it on a daily basis. If you have a wet area at the bottom of the sink, such as a large faucet, you should also drain the whole system on a daily basis.

If you have a shower, you should drain the entire system on a regular basis to prevent the build-up of grime from forming around the base of the pipe. Similarly, in the bathroom, it is important to drain the entire system on a regular basis.

Once the clogging problem is identified, the next step is to get rid of the blockage using the right drain cleaner. A simple drain snake and a plunger are enough to clear out any blocked drain, but if you are looking for a more advanced tool, you can go in for a high pressure washer and a drain snake auger. to help remove the clog effectively.

A few drains also require a larger auger or a drain snake to unclog the problem. This is because of the fact that there are some narrow spaces between the pipes that do not drain well. So, you may have to dig into the ground to find these clogs.

If the clog is too big, you can also try to drain the entire system from below using a suction hose. A pump can also work wonders to clean out any large clog. A Local Sydney Plumbers can help you fix your blocked drains, blocked sink, or blocked toilet.